NVH and Digital Twin Laboratory (NVDT Lab)

The NVH and Digital Twin Laboratory (NVDT Lab) specializes in advanced research combining analytical and experimental methodologies for creating digital twins of mechanical, structural, acoustic, and biological systems. Our primary mission is to develop, implement, and refine cutting-edge measurement techniques and simulation procedures to enhance understanding, optimization, and prediction of system behaviors.

We actively engage in federally and industry-sponsored research projects and offer specialized consulting services to industrial partners.

Key Research Areas:

Digital Twin Technologies
Multiphysics Simulation and Finite Element Analysis (FEA)
Vehicle and Tire Dynamics
Modal Analysis and Sound and Acoustic Analysis
Model Updating
Multibody Simulation
Structural Health Monitoring
Integrated Numerical and Experimental Approaches

The DTNV Lab supports faculty, graduate, and undergraduate students from various engineering disciplines, enabling them to perform innovative research and gain hands-on experience with state-of-the-art equipment and methodologies.

Laboratory Facilities and Equipment

3D Scanning Laser Doppler Vibrometer (3D SLDV) (NSF Award #2320553): Measures 3D surface velocity for vibrations and guided waves up to 5 MHz.
Digital Image Correlation (DIC) Measurement System (NSF Award #1625987): Non-contact full-field dynamic strain and displacement measurements with high-speed and low-speed cameras.
Conventional Contact-based Vibration Measurement Systems:
SCADAS III BPROC Data Acquisition Systems by LMS Instruments.
Modal Shaker System: ISA 750 Professional Amplifier by QSC, Model 2100 E11 Modal Exciter (100 lbf) by The Modal Shop.
Newport Optical Table
Two-channel Digital Storage Oscilloscope, Function Generators, Wide-range Strain Indicator, Power Supplies, and various Strain Gauges.
WSDA®-Base-104-LXRS® and V-Link®-LXRS® by LORD Microstrain wireless strain measurement systm
High performance computing sysems and software packages such as Matlab, Abaqus, Simcenter, Hypermesh, ADAMS.

Data acquisition systems, binaural headset, playback systems, and artificial head for sound quality analysis along with Artemis package

Anechoic chamber, optical tables, data acquisition systems, modal impact hammers, microphones, accelerometers, mechanical shakers.

21-acre testing facility with test pad, road course, wireless network, Harris Mobility Research Annex for vehicle research.

Learn More About the MRC

The paper by Aakash Mange was selected as the 2019 Best Paper in the SAE International Journal of Vehicle Dynamics, Stability, and NVH.

PUBLICATIONS – JOURNAL

Khadka, B. Fick, A. Afshar, M. Tavakoli, J. Baqersad*, “Non-contact vibration monitoring of rotating wind turbines using a semi-autonomous UAV,” Mechanical Systems and Signal Processing, V 138, , 2020.
Srivastava, J. Baqersad*, “A Multi-View Optical Technique to Extract the Operating Deflection Shapes of a Full Vehicle Using Digital Image Correlation,” Thin-Walled Structures, , 2019.Manage, T. Atkinson, J. Bastiaan, J. Baqersad*, “An Optical-Based Technique to Obtain Vibration Characteristics of Rotating Tires,” SAE Int. J. Vehicle Dynamics, Stability, and NVH, . 2019 (2019 Best Paper).
Bharadwaj, A. Sheidaei, A. Afshar, J. Baqersad*, “Strain Expansion Approach using DIC Mode Shapes,” Journal of Measurement, , 2019.
Panchal, L. Horton, P. Poozesh, J. Baqersad*, M. Nasiriavanaki, “Vibration Analysis of Healthy Skin: Towards a Novel Non-Invasive Skin Diagnosis Methodology,” Journal of Biomedical Optics, , 2019.
Afshar*, M. Dorina, J. Baqersad, H. Stephen, “Study of metallic thin films on the epoxy matrix as a protective barrier to ultraviolet radiation” Surface and Coatings Technology, , 2019.
Srivastava, J. Baqersad*, “An Optical-Based Technique to Obtain Operating Deflection Shapes of Structures with Complex Geometries,” , Mechanical Systems and Signal Processing, 2019.
Mange, M. Behroozi, J. Baqersad*, “Identify Challenges in Vibration Measurements for Rotating Tires Using a Finite Element Model,” in-press, International Journal of Vehicle Noise and Vibration, 2020.
Patil, V. Srivastava, J. Baqersad*, “A Multi-View Optical Technique to Obtain Mode Shapes of Structures,” Journal of Measurement, , 2018.
Afshar*, M. Dorina, H. Stephen, J. Baqersad, “Synergistic Effects of Environmental Exposures on Polymer Matrix with or without Metallic Coating Protection,” Journal of Composite Materials, , 2018.
Baqersad*, K. Bharadwaj, “Strain Expansion Reduction Approach,” Mechanical Systems and Signal Processing Journal, Vol. 101, Pages 156-167, , 2018.
Patil, J. Baqersad*, M. Behroozi, “Experimental Modal Analysis on a Tire – Lessons Learned,” , International Journal of Vehicle Noise and Vibration (IJVNV), 2017.
Baqersad*, P. Poozesh, C. Niezrecki, and P. Avitabile, “Full-Field Optical Measurement Techniques in Structural Dynamics – A Review”, Mechanical Systems and Signal Processing, Special Issue: Non-Contact Measurement, Vol. 86, Part B, Pages 17–34, 10.1016/j.ymssp.2016.02.011, 2017 (Invited).
Aizawaa*, P. Poozesh, C. Niezrecki, J. Baqersad, M. Inalpolat, G. Heilmannc, “Structural Health Monitoring of Wind Turbine Blades using Acoustic Microphones”, Structural Health Monitoring Journal, 10.1177/1475921716676871, 2017.
Baqersad*, C. Niezrecki, and P. Avitabile, “A Non-Contacting Approach for Full-Field Strain Monitoring of Rotating Structures,” ASME Journal of Vibration and Acoustics Vol. 138, Pages 031008-031008-9, 10.1115/1.4032721, 2016.
Poozesh*, J. Baqersad, C. Niezrecki, P. Avitabile, E. Harvey, and R. Yarala, “Large-area Photogrammetry Based Testing of Wind Turbine Blades” Mechanical Systems and Signal Processing Journal, 10.1016/j.ymssp.2016.07.021, 2016.
Baqersad*, C. Niezrecki, and P. Avitabile, “Extracting Full-Field Dynamic Strain on a Wind Turbine Rotor Subjected to Arbitrary Excitations using 3D Point Tracking and a Modal Expansion Technique”, Journal of Sound and Vibration, Vol. 352, Pages 16-29, 10.1016/j.jsv.2015.04.026, Sound and Vibration Journal, 2015.
Baqersad*, C. Niezrecki, and P. Avitabile, “Numerical and Experimental Analysis of the Boundary Conditions Effects on the Dynamics of Wind Turbines,” Wind Engineering Journal, V39 (4), 437–452, 10.1260/0309-524X.39.4.437, 2015.
Baqersad*, C. Niezrecki, and P. Avitabile, “Full-Field Dynamic Strain Prediction on a Wind Turbine using Displacements of Optical Targets Measured by Stereo photogrammetry,” Mechanical Systems and Signal Processing Journal, Vol. 62–63, Pages 284-295, 10.1016/j.ymssp.2015.03.021, 2015.
Lundstrom, J. Baqersad*, and C. Niezrecki, “Monitoring the Dynamics of a Robinson R44 Helicopter Main Rotor with High-Speed Stereo photogrammetry”, Experimental Techniques Journal, 10.1111/ext.12127, 2015.
E. Obando*, J. Baqersad, and P. Avitabile, “Improved Modal Characterization Using Hybrid Data” Sound and Vibration, V. 48, 8-12, 2014.
Carr, J. Baqersad*, C. Niezrecki, and P. Avitabile, “Full-Field Dynamic Strain on Wind Turbine Blade Using Digital Image Correlation Techniques and Limited Sets of Measured Data from Photogrammetric Targets” Experimental Techniques Journal, 10.1111/ext.12129, 2014.
Mashhadi*, A. Kakaee, J. Baqersad, “Vibration Characteristics of Continuously Variable Transmission Push Belts” Iranian Journal of Science and Technology Transactions of Mechanical Engineering, V. 39, 77-82, 2013.

Gates, J. Bastiaan, P. Jadhav, J. Baqersad, D. Peters, “Noise, Vibration, and Harshness Considerations for Autonomous Vehicle Perception Equipment,” WCX™: SAE World Congress, MI, 2020
Krishnasarma, A. Taylor, P. Poozesh, J. Baqersad, “Structural Vibration and Acoustic Analysis of a 3-Phase AC Induction Motor”, SAE Noise and Vibration Conference, Grand Rapids, MI, 2019.
Chawan, V. Biradjdar, M. Behroozi, J. Baqersad, “Feasibility Study Using FE Model for Tire Load Estimation,” WCX™: SAE World Congress, MI, 2019.
Srivastava, J. Baqersad, “A Non-Contact Technique for Vibration Measurement of Automotive Structures,” SAE Noise and Vibration Conference, Grand Rapids, MI, 2019.
Khadka, Y. Dong, J. Baqersad, “Structural Health Monitoring of Wind Turbine Using Digital Image Correlation Technique on a Drone” 37th IMAC, A Conference on Structural Dynamics, FL, 2019.
Birajdar, J. Baqersad, J. Bastiaan, M. Behroozi, “Investigation and Development of a Slip Model for a Basic Rigid Ring Ride Model” WCX™: SAE World Congress, MI, 2018.
Catt, B. Fick, M. Hoskins, J. Praski, J. Baqersad, “Development of a Semi-Autonomous Drone for Structural Health Monitoring of Structures using Digital Image Correlation (DIC)” 36th IMAC, A Conference on Structural Dynamics, FL, 10.1007/978-3-319-74476-6_7, 2018.
Mange, J. Baqersad, V. Srivastava, “Using Digital Image Correlation to Measure Dynamics of Rolling Tires” WCX™: SAE World Congress, MI, https://doi.org/10.4271/2018-01-1217, 2018.
Srivastava, K. Patil, J. Baqersad, “A Multi-View DIC Approach to Stitch Operating Mode Shapes of Structures” 36th IMAC, A Conference on Structural Dynamics, FL, 2018.
Mazzei, J. Baqersad, Y. Dong, “Extracting Natural Frequencies of Layered Beams Using a Continuous Variation Model and Modal Analysis,” 36th IMAC, A Conference on Structural Dynamics, FL, 10.1007/978-3-319-74476-6_10, 2018.
Baqersad, Y. Dong, A. Sheidaei, A. Mazzei, “Implementation of an Innovation and Entrepreneur Mindset Concept into Mechanics of Materials Course,” ASEE Conference, YT, 2018
Patil, J. Baqersad, J. Bastiaan, “Effects of Boundary Conditions and Inflation Pressures on the Natural Frequencies and 3D Mode Shapes of a Tire”, SAE Noise and Vibration Conference, Grand Rapids, MI, 2017.
Patil, J. Baqersad, A. Sheidaei, “Extracting Mode Shapes of a Tire Using Digital Image Correlation” 35th IMAC, A Conference on Structural Dynamics, CA, https://doi.org/10.1007/978-3-319-54735-0_22, 2017.
Bharadwaj, J. Baqersad, “Modal Expansion using Strain Mode Shapes,” 35th IMAC, A Conference on Structural Dynamics, CA, 2017.
Moeenfard, M. Khadembashi, A.H. Ghasemi, J. Baqersad “Analytical Modeling of a Piezoelectric Energy Harvesters Under Random Base Excitation,” 35th IMAC, A Conference on Structural Dynamics, CA, 2017.
Malaeke, H. Moeenfard, A.H. Ghasemi, J. Baqersad “Vibration Suppression of MR Sandwich Beams Based on Fuzzy Logic,” 35th IMAC, A Conference on Structural Dynamics, CA, 2017.
Sheidaei, Y. Dong, J. Baqersad, “Joining Aluminum to Aluminum and Dissimilar Materials – a New Course Development for Designers and Technicians,” ASEE Zone 2 Spring Conference, PR, 2017.
Dong, A. Sheidaei, J. Baqersad, “Design with Composite Materials – a New Course Development for Designers and Technicians” ASEE Zone 2 Spring Conference, PR, 2017.
Patil, J. Baqersad, D. Ludwigsen, Y. Dong, “Extracting Vibration Characteristics of a Guitar Using Finite Element, Modal Analysis, and Digital Image Correlation Techniques,” Proceedings of Meetings on Acoustics 172ASA, https://doi.org/10.1121/2.0000465, 2016.
Poozesh, J. Baqersad, C. Niezrecki, and P. Avitabile, “Practical Techniques for Scaling of Optically Measured Operating Deflection Shapes” 34th IMAC, A Conference on Structural Dynamics, Orlando, FL, 2016.
Dong, A. Mazzei, J. Baqersad, and A. Sheidaei, “How to Join Fiber-Reinforced Composite Parts –An Experimental Investigation” SEM Annual Conference and Exposition on Experimental and Applied Mechanics, The Composites and Advanced Materials, Orlando, FL, 2016.
Baqersad, P. Poozesh, C. Niezrecki, and P. Avitabile, “Full-Field Strain Monitoring of a Wind Turbine Using Very Limited Set of Displacements Measured with Three-Dimensional Point Tracking” 27th ASME Conference on Mechanical Vibration and Noise (VIB), Boston, MA, 2015.
Poozesh, J. Baqersad, C. Niezrecki, and P. Avitabile, “A Multi-Camera Stereo DIC System for Extracting Operating Mode Shapes of Large-Scale Structures” SEM Annual Conference and Exposition on Experimental and Applied Mechanics, The Composites and Advanced Materials, Costa Mesa, CA, 2015.
Baqersad, P. Poozesh, C. Niezrecki, and P. Avitabile, “Extracting Full-Field Dynamic Strain Response of a Rotating Wind Turbine Using Photogrammetry” SPIE/NDE, San Diego, CA, 2015.
Aizawaa, P. Poozesh, C. Niezrecki, J. Baqersad, M. Inalpolat, G. Heilmannc, “Wind Turbine Blade Health Monitoring Using Acoustic Array Measurements Techniques” SPIE/NDE, San Diego, CA, 2015.
Baqersad, C. Niezrecki, and P. Avitabile, “Predicting Full-Field Strain on a Wind Turbine for Arbitrary Excitation Using Displacements of Optical Targets Measured with Photogrammetry” 33rd IMAC, A Conference on Structural Dynamics, Orlando, FL, 2015.
Baqersad, P. Poozesh, C. Niezrecki, and P. Avitabile, “Comparison of Modal Parameters Extracted Using MIMO, SIMO, and Impact Hammer Tests on a Three-Bladed Wind Turbine” 32th IMAC, A Conference on Structural Dynamics, Orlando, FL, 2014.
Baqersad, C. Niezrecki, and P. Avitabile, “Prediction of Full-Field Dynamic Strain on a Three-Bladed Wind Turbine using Three-Dimensional Point Tracking and Expansion Techniques” SPIE/NDE, San Diego, CA, 2014.
Baqersad, C. Niezrecki, and P. Avitabile, “Effects of Boundary Conditions on the Structural Dynamics of Wind Turbine Blades. Part 1: Flatwise Modes” 32nd IMAC, A Conference on Structural Dynamics, Orlando, FL, 2014.
Baqersad, C. Niezrecki, and P. Avitabile, “Effects of Boundary Conditions on the Structural Dynamics of Wind Turbine Blades. Part 2: Edgewise Modes” 32nd IMAC, A Conference on Structural Dynamics, Orlando, FL, 2014.
Poozesh, J. Baqersad, C. Niezrecki, and P. Avitabile, “Full Field Inspection of a Utility Scale Wind Turbine Blade Using Digital Image Correlation” CamX, The Composites and Advanced Materials, Orlando, FL, 2014.
Avitabile, J. Baqersad, and C. Niezrecki, “Using Digital Image Correlation and Three-Dimensional Point Tracking in Conjunction with Real Time Operating Data Expansion Techniques to Predict Full Field Dynamic Strain on A Three Bladed Wind Turbine Assembly” The 11th AIVELA Conference, Ancona, Italy, 2014.
Baqersad, T. Lundstrom, C. Niezrecki, and P. Avitabile, “Measuring the Dynamics of Operating Helicopter Rotors and Wind Turbines using 3D Digital Stereo photogrammetry” 69th American Helicopter Society International Annual Forum, 2250-2256, Phoenix, AZ, 2013.
Baqersad, C. Niezrecki, P. Avitabile, and M. Slattery, “Dynamic Characterization of a Free-Free Wind Turbine Blade Assembly,” 31st International Modal Analysis Conference on Structural Dynamics, IMAC 31st, 303-312, Orange County, CA, 2013.
Lundstrom, J. Baqersad, and C. Niezrecki, “Using High-Speed Stereo photogrammetry to Collect Operating Data on a Robinson R44 Helicopter,” 31st International Modal Analysis Conference on Structural Dynamics, IMAC 31st, 401-410, Orange County, CA, 2013.
Carr, J. Baqersad, C. Niezrecki, P. Avitabile, and M. Slattery, “Predicting Dynamic Strain on Wind Turbine Blade Using Digital Image Correlation Techniques in Conjunction with Analytical Expansion Methodologies” 31st International Modal Analysis Conference on Structural Dynamics, IMAC 31st. 6, 295-302, Orange County, CA, 2013.
Lundstrom, J. Baqersad, C. Niezrecki, and P. Avitabile, “Using High-Speed Stereo Photogrammetry Techniques to Extract Shape Information from Wind Turbine/Rotor Operating Data” 30th IMAC, A Conference on Structural Dynamics, 6, 269-275, Jacksonville, FL, 2012.
Carr, J. Baqersad, C. Niezrecki, P. Avitabile, and M. Slattery, “Dynamic Stress-Strain on Turbine Blade Using Digital Image Correlation Techniques Part 1: Static Load And Calibration” 30th IMAC, A Conference on Structural Dynamics, 2012. 2, 215-220, Jacksonville, FL, 2012.
Carr, J. Baqersad, C. Niezrecki, P. Avitabile, and M. Slattery, “Dynamic Stress-Strain on Turbine Blades Using Digital Image Correlation Techniques Part 2: Dynamic Measurements” 30th IMAC, A Conference on Structural Dynamics, 2012. 2, 221-226, Jacksonville, FL, 2012.
Baqersad, J. Carr, T. Lundstrom, C. Niezrecki, P. Avitabile, and M. Slattery, “Dynamic Characteristics of a Wind Turbine Blade Using 3D Digital Image Correlation” Health Monitoring of Structural and Biological Systems 2012. 8348 SPIE/NDE, San Diego, CA, 2012.
Mashhadi, J. Baqersad, “Vibration Modeling of Surface-to-Surface Contact in CVT Bands,” Proceeding of Third International Conference on Modeling, Simulation, and Applied Optimization, (IEEE Conference) Sharjah, U.A.E, 2009.
Mashhadi, J. Baqersad, “Contact Modeling Between Segments in CVT Push-Belts, Proceeding of the Third Conference on Mechanical Engineering,” Isfahan, Iran, 2008.
Marzbanrad, J. Baqersad, A Survey on Weld-Bonded Joints” Proceeding of 9th International Conference on Design and Production, (MDP-9) Cairo, Egypt, 2007.
Baqersad, “An Investigation into Using CVT In Sedans,” Saipa Automotive Magazine, Iran, 2007.
Marzbanrad, J. Baqersad, “An Investigation into Multi-Purpose Roof panels” Proceeding of International Conference on Mechanical Engineering, Isfahan, Iran, 2006.
Baqersad, “Advances in Gearbox Design and CVT,” Iranian Manufacturing Engineering Magazine, Iran, 2006.
Baqersad, “An Investigation into NVH Analysis in Sedans Manufactured in Iran,” Iranian Mechanical Engineering Magazine, Iran, 2006.
Baqersad, M. Eshaghian, “Non-Contact Measurement Sensors,” Iranian Mechanical Engineering Magazine, Iran, 2005.

Baqersad, V. Srivastava, Y. Dong, “Multi-View DIC Technique for Vibration Measurements,” International Digital Image Correlation Conference, OR, 2019.

Baqersad, “Digital Image Correlation – State of the Art Techniques for Vibration Measurements – A Tutorial,” 37th IMAC, A Conference on Structural Dynamics, FL, 2019.

Ristow, M. Mead, M. Cordeiro, J. Ostrander, M. Mohamed, L. Espinoza, J. Baqersad, T. Atkinson, P. Atkinson, “The Influence of Plate Prebend on Periosteal Bone Strains Near the Fracture Plane,” Michigan Orthopedic Society, Dearborn, MI, 2019

Birajdar, J. Baqersad, M. Behroozi “Road Condition Monitoring for Autonomous Vehicles using Rigid-Ring Tire Model,” Tire Technology Expo, Hannover, Germany, 2018

Mange, J. Baqersad, M. Behroozi “A Non-contacting Technique to Measure Deformations of Rolling Tires,” Tire Technology Expo, Hannover, Germany, 2018

Chawan, V. Birajdar, J. Baqersad, “ɫ��Ƶ Intelligent Tire for Improved Ride and Dynamics of Vehicles,” Simulia Regional User Meeting, MI, 2018

Mange, V. Srivastava, J. Baqersad, “Using Abaqus to Identify Challenges in Vibration Measurement for Rotating Tires,” Simulia Regional User Meeting, MI, 2018.

V. Srivastava, J. Baqersad, “Optical Techniques for Non-Contact Measurements,” Michigan Academy of Science, Arts, and Letters, University of Central Michigan, MI, 2018.

Mange, J. Baqersad, M Behroozi, “An Optical Based Technique to Obtain Vibration Characteristics of Rotating Tires,” 2018 Annual Conference of the TIRE Society, Akron, OH, 2018.

Birajdar, J. Baqersad, M Behroozi, “Effect of cam parameters in the tandem cam tire enveloping model on short obstacles using DOE (Design of Experiment) approach,” 2017 Annual Conference of the TIRE Society, Akron, OH, 2017.

Kandampadath, J. Baqersad, “Ride Performance using KU SWIFT-Based Tire Model,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Chang, M. Peterson, J. Baqersad, “Measuring Dynamic Deformation of a Tire using DIC,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Birajdar, J. Baqersad, J. Bastiaan, “KU-Tire Model for Transient Forces under Longitudinal Slip based on Relaxation Length,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Wesley, J. Baqersad, “Measuring Inflation Pressure of a Tire Using a Microphone,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Vivekananda Panchal, J. Baqersad, “Finite Element Modeling of Skin for Vibration Analysis,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Mange, J. Baqersad, “Experimental Modal Test on a Model Airplane,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Khadka, J. Baqersad, “Finite Element Modeling and Validation of a Suspension A-arm,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Srivastava, J. Baqersad, “Multi-view DIC for Measuring Operating Mode Shapes of a Cantilever Beam,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Bharadwaj, J. Baqersad, “Strain Expansion Methodology,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.

Kandampadath, J. Baqersad, “A Semi-Empirical Tire Model for Improved Ride and Comfort Dynamics,” Michigan Academy of Science, Arts, and Letters, Saginaw Valley State University, MI, 2016.

Baqersad, K. Patil, “A Multi-View Point-Tracking Technique to Extract Mode Shapes of Structures” iDICs Conference, Philadelphia, PA, 2016.

Baqersad, J. Huang, D. Ludwigsen, A. Sheidaei, “Vibration Characteristics of a Guitar Using Finite Element and Digital Image Correlation Techniques,” Michigan Academy of Science, Arts, and Letters, Saginaw Valley State University, MI, 2016.

Baqersad, V. Srivastava, Y. Dong, “Multi-View DIC Technique for Vibration Measurements,” International Digital Image Correlation Conference, OR, 2019.
Baqersad, “Digital Image Correlation – State of the Art Techniques for Vibration Measurements – A Tutorial,” 37th IMAC, A Conference on Structural Dynamics, FL, 2019.
Ristow, M. Mead, M. Cordeiro, J. Ostrander, M. Mohamed, L. Espinoza, J. Baqersad, T. Atkinson, P. Atkinson, “The Influence of Plate Prebend on Periosteal Bone Strains Near the Fracture Plane,” Michigan Orthopedic Society, Dearborn, MI, 2019
Birajdar, J. Baqersad, M. Behroozi “Road Condition Monitoring for Autonomous Vehicles using Rigid-Ring Tire Model,” Tire Technology Expo, Hannover, Germany, 2018
Mange, J. Baqersad, M. Behroozi “A Non-contacting Technique to Measure Deformations of Rolling Tires,” Tire Technology Expo, Hannover, Germany, 2018
Chawan, V. Birajdar, J. Baqersad, “ɫ��Ƶ Intelligent Tire for Improved Ride and Dynamics of Vehicles,” Simulia Regional User Meeting, MI, 2018
Mange, V. Srivastava, J. Baqersad, “Using Abaqus to Identify Challenges in Vibration Measurement for Rotating Tires,” Simulia Regional User Meeting, MI, 2018.
V. Srivastava, J. Baqersad, “Optical Techniques for Non-Contact Measurements,” Michigan Academy of Science, Arts, and Letters, University of Central Michigan, MI, 2018.
Mange, J. Baqersad, M Behroozi, “An Optical Based Technique to Obtain Vibration Characteristics of Rotating Tires,” 2018 Annual Conference of the TIRE Society, Akron, OH, 2018.
Birajdar, J. Baqersad, M Behroozi, “Effect of cam parameters in the tandem cam tire enveloping model on short obstacles using DOE (Design of Experiment) approach,” 2017 Annual Conference of the TIRE Society, Akron, OH, 2017.
Kandampadath, J. Baqersad, “Ride Performance using KU SWIFT-Based Tire Model,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Chang, M. Peterson, J. Baqersad, “Measuring Dynamic Deformation of a Tire using DIC,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Birajdar, J. Baqersad, J. Bastiaan, “KU-Tire Model for Transient Forces under Longitudinal Slip based on Relaxation Length,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Wesley, J. Baqersad, “Measuring Inflation Pressure of a Tire Using a Microphone,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Vivekananda Panchal, J. Baqersad, “Finite Element Modeling of Skin for Vibration Analysis,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Mange, J. Baqersad, “Experimental Modal Test on a Model Airplane,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Khadka, J. Baqersad, “Finite Element Modeling and Validation of a Suspension A-arm,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Srivastava, J. Baqersad, “Multi-view DIC for Measuring Operating Mode Shapes of a Cantilever Beam,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Bharadwaj, J. Baqersad, “Strain Expansion Methodology,” Flint Student Research Conference, University of Michigan Flint, MI, 2017.
Kandampadath, J. Baqersad, “A Semi-Empirical Tire Model for Improved Ride and Comfort Dynamics,” Michigan Academy of Science, Arts, and Letters, Saginaw Valley State University, MI, 2016.
Baqersad, K. Patil, “A Multi-View Point-Tracking Technique to Extract Mode Shapes of Structures” iDICs Conference, Philadelphia, PA, 2016.
Baqersad, J. Huang, D. Ludwigsen, A. Sheidaei, “Vibration Characteristics of a Guitar Using Finite Element and Digital Image Correlation Techniques,” Michigan Academy of Science, Arts, and Letters, Saginaw Valley State University, MI, 2016.

ɫ����Ƶ